Draft Chesapeake Bay Preservation Areas (CBPA) of Loudoun County, VA (2011)

Data format: SDE Feature Class

File or table name: GISDBB.GISBROW.CBPA_POLY

Coordinate system: Lambert Conformal Conic

Theme keywords: environment, inland waters, boundaries, Chesapeake Bay Preservation Areas (CBPA), Resource Management Area (RMA), Resource Protection Area (RPA)

Abstract: NOTE: The Loudoun County Board of Supervisors has voted to suspend discussions on the proposed Chesapeake Bay Preservation Act amendments until the State of Virginia completes Phase 2 of the Watershed Implementation Plan (WIP) and local requirements are determined. NOTE: The status of this data is PROPOSED. NOTE: The Board of Supervisors indicated its desire to remove Resource Protection Area (RPA) adjacent to ponds during the March 1, 2011 Committee of the Whole Work Session. The extent of the RPA has subsequently been updated to reflect the Board's direction. The Chesapeake Bay Preservation Areas (CBPA) means any land designated by the County pursuant to Part III of the Chesapeake Bay Preservation Area Designation and Management Regulations and Section 10.1-2107 of the Code of Virginia. The Chesapeake Bay Preservation Areas (CBPA) dataset is comprised of Resource Protection Areas (RPA), Resource Management Areas (RMA), Perennial Waterbodies, and Non-Jurisdictional Areas. An RPA is (i) all wetlands connected by surface flow and contiguous to water bodies with perennial flow; and (ii) a 100-foot Buffer Area measured horizontally from, and located adjacent to and landward of (i) and along both sides of any water body with perennial flow, as measured horizontally from the channel scarline. An RMA is all areas of the County not designated as a Resource Protection Area. Visit www.loudoun.gov/ChesapeakeBay for more information. Additional questions can also be directred to county staff through the Chesapeake Bay information line at 703-777-0655 or by email to ChesBay@loudoun.gov.

FGDC and ESRI Metadata:

Metadata elements shown with blue text are defined in the Federal Geographic Data Committee's (FGDC) Content Standard for Digital Geospatial Metadata (CSDGM). Elements shown with green text are defined in the ESRI Profile of the CSDGM. Elements shown with a green asterisk (*) will be automatically updated by ArcCatalog. ArcCatalog adds hints indicating which FGDC elements are mandatory; these are shown with gray text.

Identification Information:


Citation:
Citation information:
Originators: Loudoun County, VA, Department of Building and Development


Title:
Draft Chesapeake Bay Preservation Areas (CBPA) of Loudoun County, VA (2011)
*File or table name: GISDBB.GISBROW.CBPA_POLY


Publication date: 10Mrch11
*Geospatial data presentation form: vector digital data


Publication information:
Publication place: Leesburg, VA
Publisher: Loudoun County, VA

Online linkage: see distribution information


Description:
Abstract:
NOTE: The Loudoun County Board of Supervisors has voted to suspend discussions on the proposed Chesapeake Bay Preservation Act amendments until the State of Virginia completes Phase 2 of the Watershed Implementation Plan (WIP) and local requirements are determined. 

NOTE: The status of this data is PROPOSED.

NOTE: The Board of Supervisors indicated its desire to remove Resource Protection Area (RPA) adjacent to ponds during the March 1, 2011 Committee of the Whole Work Session.  The extent of the RPA has subsequently been updated to reflect the Board's direction.

The Chesapeake Bay Preservation Areas (CBPA) means any land designated by the County pursuant to Part III of the Chesapeake Bay Preservation Area Designation and Management Regulations and Section 10.1-2107 of the Code of Virginia.  The Chesapeake Bay Preservation Areas (CBPA) dataset is comprised of Resource Protection Areas (RPA), Resource Management Areas (RMA), Perennial Waterbodies, and Non-Jurisdictional Areas.

An RPA is (i) all wetlands connected by surface flow and contiguous to water bodies with perennial flow; and (ii) a 100-foot Buffer Area measured horizontally from, and located adjacent to and landward of (i) and along both sides of any water body with perennial flow, as measured horizontally from the channel scarline.

An RMA is all areas of the County not designated as a Resource Protection Area.

Visit www.loudoun.gov/ChesapeakeBay for more information.  Additional questions can also be directred to county staff through the Chesapeake Bay information line at 703-777-0655 or by email to ChesBay@loudoun.gov.

Purpose:
The Chesapeake Bay Preservation Areas are regulatory boundaries implemented to protect and improve the water quality of the Chesapeake Bay, its tributaries, and other state waters by minimizing the effects of human activity upon these waters in order to provide for the health, safety and general welfare of the citizens of Loudoun County.

Supplemental information:
Data are stored in the corporate ArcSDE Geodatabase as a polygon feature class. The coordinate system is Virginia State Plane (North), Zone 4501, datum NAD83 HARN (vertical datum, if applicable, NAVD88), US Survey foot units.

*Language of dataset: en


Time period of content:
Time period information:
Single date/time:
Calendar date: 20Aug09

Currentness reference:
ground condition

Status:
Progress: Complete
Maintenance and update frequency: As needed

Spatial domain:
Bounding coordinates:
*West bounding coordinate: -77.963457
*East bounding coordinate: -77.319111
*North bounding coordinate: 39.329552
*South bounding coordinate: 38.841707

Local bounding coordinates:
*Left bounding coordinate: 11635727.443214
*Right bounding coordinate: 11816991.999647
*Top bounding coordinate: 7167716.999691
*Bottom bounding coordinate: 6991716.999986

Keywords:
Theme:
Theme keywords: environment, inland waters, boundaries
Theme keyword thesaurus: ESRI ArcIMS Topic Categories

Theme:
Theme keywords: Chesapeake Bay Preservation Areas (CBPA), Resource Management Area (RMA), Resource Protection Area (RPA)
Theme keyword thesaurus: none

Place:
Place keywords: Virginia, Loudoun, County
Place keyword thesaurus: none

Access constraints: none
Use constraints:
Every reasonable effort has been made to assure the accuracy of these data. Loudoun County, Virginia does not assume any liability arising from the use of these data.  These data are provided without warranty of any kind, expressed or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular service.  Reliance on these data is at the risk of the user.
These data were generated for use by Loudoun County and are available to the public.  These data are intended for use at 1:2400 scale or smaller.  Acknowledgement of Loudoun County would be appreciated in products derived from this data.

Point of contact:
Contact information:
Contact organization primary:
Contact organization: Loudoun County, Virginia, Department of Building and Development
Contact position: Public Information Counter


Contact address:
Address type: mailing and physical address
Address:
1 Harrison Street SE, mail stop 60A
Address:
P.O. Box 7000
City: Leesburg
State or province: VA
Postal code: 20175
Country: USA

Contact voice telephone: (703)777-0397
Contact facsimile telephone: (703)771-5522


Contact electronic mail address: bad@loudoun.gov


Hours of service: 8:00-5:00 EST, M-F



Security information:
Security classification: Public Information

*Native dataset format: SDE Feature Class
*Native data set environment:
Microsoft Windows Vista Version 6.0 (Build 6002) Service Pack 2; ESRI ArcCatalog 9.3.1.4000


Back to Top
Data Quality Information:


Attribute accuracy:
Attribute accuracy report:
Retention of attribute accuracy throughout the personal geodatabase or shapefile to ArcSDE geodatabase feature class coversion process was ensured by a manual or automatic QA/QC programmatic check. To meet satisfactory QA/QC requirements the input coverage and output feature class must have, on a record by record basis, identical attribution when comparing all concatenated fields to all the user-defined attribution.

Quantitative attribute accuracy assessment:

Logical consistency report:
Topologically clean

Completeness report:
Features may have been eliminated or generalized due to scale and intended use. To assist Loudoun County, Virginia in the maintenance of the data, please provide any information concerning discovered errors, omissions, or other discrepancies found in the data.

Positional accuracy:
Horizontal positional accuracy:
Horizontal positional accuracy report:
Retention of coordinate accuracy throughout the personal geodatabase or shapefile to ArcSDE geodatabase feature class conversion process was ensured by a manual or automatic QA/QC programmatic check. To meet satisfactory QA/QC requirements the input coverage and output feature class must have the same record total, and on a record by record basis, area, perimeter, and length differential of less than +/- 0.5%.

Quantitative horizontal positional accuracy assessment:

Quantitative horizontal positional accuracy assessment:
Horizontal positional accuracy explanation:
"Any features captured in Phase III (2005 data) were compiled to meet ASPRS and NSSDA standards for Class I map at 1:2400 scale, but a rigid accuracy test was not performed."

Lineage:
Source information:
Source citation:
Citation information:
Originators: Loudoun County, Virginia, Department of Building and Development; GIS Administration


Publication date: 20Mch10
Geospatial data presentation form: vector digital data


Source contribution:
Chesapeake Bay Preservation Act, Sections 10.1-2100 et seq., of the Code of Virginia

Source time period of content:
Time period information:
Single date/time:


Process step:
Process description:
The Perennial Waterbody component of the CBPA is compiled using subsets of the Soil Drains, Soil Water Polygons, and (basemap) Waterbody data. This data is then buffered 100 feet to create the RPA. This is then incorporated into a countywide coverage using the county and town boundaries in order to define the areas in RMA and those that are Non-Jurisdictional.

Process date: August 2009


Process contact:
Contact information:
Contact organization primary:
Contact organization: Loudoun County, Department of Building and Development

Process step:
Process description:
This data layer was updated with a schema change and new source data layer. The schema change involved removing the CB_JURISDICTION field from layer.

The layer was updated with the addition of "Perennial Waterbodies" data as another source layer.

Process date: Dec 2009


Process contact:
Contact information:
Contact organization primary:
Contact organization: Loudoun County, Department of Building and Development
Contact position: GIS Department


Process step:
Process description:
Per Loudoun County BoS's direction, the Resource Protection Area (RPA) adjacent to ponds was removed from the data and the extent of the RPA updated

Process date: 01Mrch11


Process contact:
Contact information:
Contact organization primary:
Contact organization: Loudoun County, Department of Building and Development
Contact position: GIS Department


Back to Top
Spatial Data Organization Information:


Indirect spatial reference method:
Loudoun County


*Direct spatial reference method: Vector


Point and vector object information:
SDTS terms description:
*Name: GISDBB.GISBROW.CBPA_POLY
*SDTS point and vector object type: G-polygon
*Point and vector object count: 1917

SDTS terms description:
SDTS point and vector object type: Label point
Point and vector object count: 161

SDTS terms description:
SDTS point and vector object type: GT-polygon composed of chains
Point and vector object count: 161

SDTS terms description:
SDTS point and vector object type: Point
Point and vector object count: 812

SDTS terms description:
SDTS point and vector object type: Label point
Point and vector object count: 0

ESRI terms description:
*Name: GISDBB.GISBROW.CBPA_POLY
*ESRI feature type: Simple
*ESRI feature geometry: Polygon
*ESRI topology: FALSE
*ESRI feature count: 1917
*Spatial index: TRUE
*Linear referencing: FALSE


Back to Top
Spatial Reference Information:


Horizontal coordinate system definition:
Coordinate system name:
*Projected coordinate system name: NAD_1983_HARN_StatePlane_Virginia_North_FIPS_4501_Feet
*Geographic coordinate system name: GCS_North_American_1983_HARN

Planar:
Map projection:
*Map projection name: Lambert Conformal Conic
Lambert conformal conic:
*Standard parallel: 38.033333
*Standard parallel: 39.200000
*Longitude of central meridian: -78.500000
*Latitude of projection origin: 37.666667
*False easting: 11482916.666667
*False northing: 6561666.666667

Planar coordinate information:
*Planar coordinate encoding method: coordinate pair
Coordinate representation:
*Abscissa resolution: 0.000328
*Ordinate resolution: 0.000328
*Planar distance units: survey feet

Geodetic model:
*Horizontal datum name: D_North_American_1983_HARN
*Ellipsoid name: Geodetic Reference System 80
*Semi-major axis: 6378137.000000
*Denominator of flattening ratio: 298.257222

Vertical coordinate system definition:
Altitude system definition:
Altitude datum name: Not Applicable
*Altitude resolution: 1.000000
Altitude distance units: Not Applicable
*Altitude encoding method: Explicit elevation coordinate included with horizontal coordinates

Back to Top
Entity and Attribute Information:


Detailed description:
*Name: GISDBB.GISBROW.CBPA_POLY


Entity type:
*Entity type label: GISDBB.GISBROW.CBPA_POLY
*Entity type type: Feature Class
*Entity type count: 1917
Entity type definition:
polygon feature class
Entity type definition source:
ESRI

Attribute:
Attribute label: CB_UPD_USER
*Attribute alias: CB_UPD_USER
Attribute definition:
Not for public distribution. Internal User ID of editor creating or modifying a feature
Attribute definition source:
Loudoun County

*Attribute type: String
*Attribute width: 5
*Attribute precision: 0
*Attribute scale: 0


Attribute:
Attribute label: CB_APP_NM
*Attribute alias: CB_APP_NM
Attribute definition:
Name of the source application document
Attribute definition source:
Loudoun County

*Attribute type: String
*Attribute width: 14
*Attribute precision: 0
*Attribute scale: 0


Attribute:
Attribute label: OBJECTID
*Attribute alias: OBJECTID
Attribute definition:
Internal feature number.
Attribute definition source:
ESRI

*Attribute type: OID
*Attribute width: 4
*Attribute precision: 10
*Attribute scale: 0


Attribute domain values:
Unrepresentable domain:
Sequential unique whole numbers that are automatically generated.


Attribute:
Attribute label: CB_TYPE
*Attribute alias: CB_TYPE
Attribute definition:
Type of preservation area
Attribute definition source:
Loudoun County

*Attribute type: String
*Attribute width: 5
*Attribute precision: 0
*Attribute scale: 0


Attribute domain values:
Enumerated domain:
Enumerated domain value: NOT
Enumerated domain value definition:
Non-jurisdictional area
Enumerated domain value definition source:
Loudoun County

Enumerated domain:
Enumerated domain value: RMA
Enumerated domain value definition:
Resource Management Areas; all areas of County not designated as a Resource Protection Area
Enumerated domain value definition source:
Loudoun County

Enumerated domain:
Enumerated domain value: RPA
Enumerated domain value definition:
Resource Protection Area; all water bodies with perennial flow
Enumerated domain value definition source:
Loudoun County

Enumerated domain:
Enumerated domain value: WATER
Enumerated domain value definition:
Perrenial waterbodies
Enumerated domain value definition source:
Loudoun County

Attribute:
Attribute label: CB_GIS_START_DATE
*Attribute alias: CB_GIS_START_DATE
Attribute definition:
Not currently utilized.  This field will track when a record FIRST appears on the GIS.
Attribute definition source:
Loudoun County

*Attribute type: Date
*Attribute width: 36
*Attribute precision: 0
*Attribute scale: 0


Attribute domain values:
Unrepresentable domain:
User generated text


Attribute:
Attribute label: CB_UPD_SOURCE
*Attribute alias: CB_UPD_SOURCE
Attribute definition:
Source that created or modified feature class
Attribute definition source:
Loudoun County

*Attribute type: String
*Attribute width: 5
*Attribute precision: 0
*Attribute scale: 0


Attribute domain values:
Enumerated domain:
Enumerated domain value: See Overview Description for data dictionary of attribute

Attribute:
Attribute label: CB_UPD_DATE
*Attribute alias: CB_UPD_DATE
Attribute definition:
Date feature class created or modified
Attribute definition source:
Loudoun County

*Attribute type: Date
*Attribute width: 36
*Attribute precision: 0
*Attribute scale: 0


Attribute domain values:
Unrepresentable domain:
User generated text


Attribute:
Attribute label: CB_MAINT_ID
*Attribute alias: CB_MAINT_ID
Attribute definition:
This is a foreign key field to be used to relate maintenance records
Attribute definition source:
Loudoun County

*Attribute type: String
*Attribute width: 11
*Attribute precision: 0
*Attribute scale: 0


Attribute domain values:
Unrepresentable domain:
User generated text


Attribute:
Attribute label: CB_GIS_END_DATE
*Attribute alias: CB_GIS_END_DATE
Attribute definition:
Not currently utilized.  This field will track when a record LAST appears on the GIS
Attribute definition source:
ESRI

*Attribute type: Date
*Attribute width: 36
*Attribute precision: 0
*Attribute scale: 0


Attribute domain values:
Unrepresentable domain:
User generated text


Attribute:
Attribute label: SHAPE
*Attribute alias: Shape
Attribute definition:
Feature geometry.
Attribute definition source:
ESRI

*Attribute type: Geometry
*Attribute width: 4
*Attribute precision: 0
*Attribute scale: 0


Attribute domain values:
Unrepresentable domain:
Coordinates defining the features.


Attribute:
*Attribute label: DB2GSE.ST_Area(SHAPE)
*Attribute alias: DB2GSE.ST_Area(SHAPE)


*Attribute type: Double
*Attribute width: 0
*Attribute precision: 0
*Attribute scale: 0


Attribute:
*Attribute label: DB2GSE.SdeLength(SHAPE)
*Attribute alias: DB2GSE.SdeLength(SHAPE)


*Attribute type: Double
*Attribute width: 0
*Attribute precision: 0
*Attribute scale: 0


Overview description:
Entity and attribute overview:
CB_UPD_SOURCE: Source that created or modified feature class

Entity and attribute detail citation:
Code     Description

0           Undetermined
10         Legacy
21         County
30         Contract
40         Model

Back to Top
Distribution Information:


Distributor:
Contact information:
Contact organization primary:
Contact organization: Loudoun County, VA, Office of Mapping and Geographic Information (OMAGI)
Contact position: Public Information Counter


Contact address:
Address type: mailing and physical address
Address:
1 Harrison Street S.E., 2nd floor, mail stop 65
City: Leesburg
State or province: VA
Postal code: 20175
Country: USA

Contact voice telephone: (703)771-5778
Contact facsimile telephone: (703)771-5075


Contact electronic mail address: mapping@loudoun.gov


Hours of service: 8:30-4:30 EST, M-F



Resource description: Offline Data


Distribution liability:
Every reasonable effort has been made to assure the accuracy of these data. Loudoun County, Virginia does not assume any liability arising from the use of these data.  These data are provided without warranty of any kind, either expressed or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular service.  Reliance on these data is at the risk of the user.

Standard order process:
Digital form:
Digital transfer information:
Format name: GDB
Format specification:
ESRI Personal Geodatabase Feature Class

Digital transfer option:
Offline option:
Offline media: DVD

Digital form:
Digital transfer information:
Format name: SHP
Format specification:
ESRI Shapefile

Digital transfer option:
Offline option:
Offline media: DVD

Digital form:
Digital transfer information:
Format name: DXF
Format specification:
AutoCad Digital Exchange File

Digital transfer option:
Offline option:
Offline media: DVD

Fees: Loudoun County distributes spatial data in ArcGIS database or shapefile & DXF format for the cost of reproduction. Countywide spatial datasets may be purchased for $22 per DVD for up to 4.5 GB of data. There is a $100 surcharge to purchase countywide topography, and a $3 charge if the item is to be mailed. If the customer wants the data in DXF format and/or would like OMAGI to custom select specific geographic areas of the County, there is an additional $7 per 15 minute increment labor charge. Select aerial imagery is also available.
Ordering instructions:
Size limit: 4.5 GB. Visit our website at: http://www.loudoun.gov/omagi, click on "Loudoun County Mapping Documents & Order Forms."  The "Forms" directory will lead you to custom & standard (countywide) data order forms.

Hardcopy maps may also be available; please contact the Mapping Office Public Information Counter for more information regarding all data requests.


Back to Top
Metadata Reference Information:


*Metadata date: 20111020


*Language of metadata: en


Metadata contact:
Contact information:
Contact organization primary:
Contact organization: Loudoun County, VA, OMAGI
Contact position: Metadata Specialist


Contact address:
Address type: mailing and physical address
Address:
1 Harrison Street SE, 2nd Floor
Address:
MS 65
City: Leesburg
State or province: VA
Postal code: 20177-7000
Country: USA

Contact voice telephone: (703)771-5778
Contact facsimile telephone: (703)771-5075


Contact electronic mail address: mapping@loudoun.gov


Hours of service: 8:00-5:00 EST, M-F



*Metadata standard name: FGDC Content Standards for Digital Geospatial Metadata
*Metadata standard version: FGDC-STD-001-1998
*Metadata time convention: local time


Metadata use constraints:
This metadata reflects the source Geodatabase format and specific elements may not apply if your data is exported to SHP or DXF products. User must be aware that changes to data schema occur during data export that may not be reflected in this metadata, which represents Loudoun County's corporate geodatabase. Acknowledgement of Loudoun County would be appreciated in the use of this metadata.


Metadata extensions:
*Online linkage: http://www.esri.com/metadata/esriprof80.html
*Profile name: ESRI Metadata Profile

Back to Top